Take a good look... Although it lacks the SS hood, you
could be easily fooled by the looks and performance of this '68 L30/M20
coupe...
 |
If you are a regular attendee of classic car cruise and show
events, you may have encountered an adamant believer that some first-generation
Camaro Super Sports were manufactured with the 327ci engine. While the claim of
a factory SS-327 Camaro is absolutely untrue - no production Camaro SS's were
ever built with engines smaller than the 350 - there are understandable reasons
for the spread of such rumors, since therewas a factory 327 Camaro model
with technical specifications and performance very similar to that of the
SS-3501. Included with this 327 were a number of pieces
of high-performance equipment that some have believed were applied only to the
SS or Z28. This is a story that has been largely forgotten --- the details
behind an unsung performance Camaro, the L30/M20 Camaro of 1967-68.
The 1967-682 RPO
(regular production option) combination of the L30 327ci-275HP V8 engine with
the M20 4-speed manual transmission created a true high-performance automobile,
in part due to additional components automatically installed by the factory
when the M20 was paired with the L30. The details of this package were poorly
documented and essentially unadvertised; probably only the most discerning
people of the era realized the implications.
The writers and editors of period car enthusiast magazines
rarely delved deeper into available options than the basic promotional
literature supplied by Chevrolet, and the Chevrolet marketers preferred to
emphasize the SS models, or later, the Z28. Serious racers considered the SS
and Z28 to be only starting points, with further modifications required to meet
their needs. So it was not well-known (and still isn't3) that
the L30/M20 Camaro was the only regular production Camaro outside of the
SS/Z28 models to receive the heavy-duty "12-bolt" rear-end,
right-side traction bar (in 67), and multi-leaf rear springs (in 68), as well
as additional performance equipment otherwise exclusive to the SS or Z28 lines.
The potential for model confusion is understandable since, without this
knowledge, a L30/M20 could easily be mistaken for a SS-350 stripped of
ornamentation (if the 327 was mistaken for a 350), or, if the 327ci engine was
recognized as such, the L30/M20 could be interpreted as evidence of a factory
SS-327.
The above ad ran in many major enthusiast's magazines. It
depicts a 327 coupe in "SS trim" and calls it an "SS"!!!
Could this have added to some of the confusion? I think so...
PO L30 "327-275" Engine. A real performer when
combined with RPO M20 four speed transmission.
|
If there is any confusion, much of the blame can
probably be assigned to the manufacturer. Chevrolet's long-term
record-keeping policies have proved to be so poor (perhaps deliberately poor)
that they have no permanent individual records of the vehicles produced (GM
of Canada is the exception, but Canadian Camaros were a relatively small
number of the total Camaro population.) Chevrolet files4 have
been nearly purged of first generation Camaro engineering data; old drawing
numbers are now being reused on new models with old drawing files trashed in
the process. Little, if any, of the original data remains in Chevrolet files.
Chevrolet has even lost the official translation and/or significance of
certain of their own production codes.
|
An example particularly germane to the topic at hand is the
1967 "4P" Trim/Cowl Tag code. The meaning of codes can now be
understood only by deduction; by acquiring data on a number of vehicles,
determining the similarities and differences, and then attempting to deduce the
original meaning of the code. Lacking an official Chevrolet interpretation, the
4P code was, for a long time, interpreted in aftermarket Camaro literature as
unique to the SS-350. Recently however, a more complete meaning has been
determined by the U.S. Camaro Club. This code is now believed to indicate a
high-performance small-block V-8 application; 5 this
includes not only the SS-350 but, for a short period of time, also the Z28
(until the unique "4L" code was set aside) and the L30/M20. (The
extent of application of the "4P" code to 1967 L30/M20s is still
being researched.)
A better understanding of the significance of the L30/M20
Camaro can be had by first briefly reviewing the specifications of its close
cousin, the SS-350...
The SS-350 Camaro, a.k.a, the L48/M20:
350ci-295HP, 4-speed (base V8 price + $395.00 in 1968)
When Chevrolet introduced the all-new 1967 Camaro on
September 29, 1966, the top-of-the-line Camaro Super Sport was powered only by
a new high-performance 350ci-295HP small-block V8. The 350 engine (in its
various forms) would prove to be the last6 and
arguably most famous expansion of the overhead-valve, small-block Chevrolet
engine line that began in the 1950's. The previous incarnations, the 327, 283,
and 265 (in reverse chronological order) had developed a formidable reputation
for dependable power.
The additional displacement of the 350 was obtained from the
327 engine block via a new crankshaft7 that
increased the 3.25 inch stroke used on the 327 engine to 3.48 inches while
retaining the 4.00 inch bore. This new engine debuted in the 1967 Camaro as
part of RPO L48 (the Super Sport, or SS), and would not be made available to
the other Chevrolet lines until the next model year. While the Camaro SS line
would soon be bolstered by a series of 396ci big-block engine options that
would push advertised power ratings to the 325-375HP range, the 350 engine
retains a strong identity as the baseline powerplant of the original Camaro SS,
the SS-350.
During the first two years of the Camaro, RPO L48 was more
than just the new 350ci engine; it was a true option package that
pulled together a balanced collection of performance components and added a
special trim package for visual distintion8. While
certain performance components (dual exhaust, for example) were also available
to many non-SS models via separate RPOs, other components (like the traction
bar, heavy-duty clutch, and multi-leaf springs) were restricted to Camaro
models internally designated by Chevrolet as high-performance vehicles and
could not be specifically ordered as a separate option9. Not
counting non-functional special interior and exterior trim (SS badges, SS hood,
SS paint stripe, chrome-plated engine trim, etc.), the 1967-68 RPO L48
added eight high-performance component groups to the baseline vehicle:
A heavy-duty rear-end based on a larger, 8.875 inch
diameter, ring gear suitable for high-torque engines. This rear-end is commonly
called the "12-bolt," after the number of bolts on the ring-gear (as
well as on the cover). The standard rear-end of this era was
"10-bolt" rear end with a 8.125 inch diameter ring-gear10.
Heavy-duty driveshaft universal joints, suitable for
high-torque engines.
Significant suspension improvements: stiffer springs
(multi-leaf rear springs in 1968) teamed with heavy-duty shocks and, with 1967
manual transmissions, a rear axle radius rod (a.k.a., traction bar).
A low-RPM, high torque, starter motor, needed for
high-compression ratio engines and upgraded from the baseline starter.
A two-piece rear brake line with rear brake proportioning
valve to improve pressure distribution between front and rear brakes. (1968
only. 1967 Camaros featured this only on air conditioned cars and disc brake
cars. *See Illustration below.)
A dual-exhaust system with 2-1/4 inch pipes for improved
power.
Wider profile 70-series tires: D70x14 in 1967 and F70x14 in
1968, as compared to the standard D78x14 tires used in both years.
Heavy-duty, larger diameter (11.0-inch) clutch, suitable for
high-torque engines. (Obviously only for use with manual transmissions.)
Having reviewed the performance features of the SS-350
Camaro, let’s look at the top-of-the-line 327-powered Camaro.
The L30/M20 Camaro:
327ci-275HP, 4-speed (base V8 price + $331.00 in 1968, with
N10 dual exhaust & PY5 F70x14 tires)
While the L48 package got top billing, the less-publicized
optional upgrade to the base 327 engine, RPO L30, boosted performance of the
base 327ci V8 from 210HP to 275HP. When the L30 engine was combined with the
M20 4-speed manual transmission, and only in this case, Chevrolet
considered the result to have crossed the line into high-performance territory
and added to the package a number of high-performance components, including
identical (or near-identical) matches to the first five of the eight SS-350
performance component categories... Similarly to the 67-68 Z28, the
L30/M20 was outfitted with the smaller, 10.4-inch diameter clutch, and the
larger clutch used on the L48/M20 could not be separately ordered. Though not a
heavy-duty clutch in the same sense as the 11.0-inch SS clutch, with the
L30/M20 combination the pressure plate on the 10.4-inch clutch was upgraded to
a more durable lining. When the dual exhaust system (RPO N61 in 67; RPO
N10 in 68) and wider-profile tires (such as RPO PY5 in 68) were added to the
L30/M20 option, the result was a truly functional 327 equivalent of the SS-350.
The L30/M20 with N10/PY5 add-ons could be had for a 1968 list price of $331.00,
$64.00 less than the SS-350 L48/M20 and enough difference to pay for an
additional high-performance option like positraction, with change left over.
Budget-minded performance enthusiasts who were in-the-know could optimize their
fun by adding additional options to the L30/M20 Camaro to meet their specific
needs, rather than by selecting the SS-350.
|
In addition to the clutch, the other significant difference
between the L48 and L30/M20 was the M20 transmission. M20 was not the name of
the transmission, it was the functional designation for any standard
ratio 4-speed. Unfortunately, Chevrolet yoked the L30 to the less-desirable
cast-iron-bodied Saginaw 4-speed, heavier by some 14 lbs. than the Muncie
aluminum-bodied 4-speed11 that was placed behind the L48. Just
for the L30 application, the Saginaw 4-speed was beefed-up slightly by the
substitution of heavy-duty bearings for the standard bearings in both the
clutch-gear shaft bearing and rear mainshaft bearing locations.
The increased weight of the Saginaw was offset by the lower
weight of the standard, and arguably better-looking, hood used on the L30/M20,
as compared to the much heavier SS hood with its non-functional
"window-dressing" hump and ornaments. The 1968 L30/M20 with N10
exhaust is documented12 as being a total of 29 lbs. lighter than
the L48/M20, though a few pounds of this margin would be eaten away if the PY5
wide-track tires were added to the 327 powered car. While data that would allow
a comparison of vertical Center of Gravity (CG) coordinates are not available
at this time, the L30/M20/N10 may have enjoyed a slight handling advantage from
a lowered CG due to the mass shift combination of the much lighter hood and the
slightly heavier transmission.
Identifying an L30/M20:
The L30/M20 Camaro was contained, as was the 1967 Z28 (base
V8 price + $663.60 including the Z28 required M21/J50/J52 options), in a
package with no tell-tale external badging. To the undiscerning eye the L30/M20
is just another plain-jane Camaro. The only way to verify an original L30/M20,
without the original paper documentation, is to check as many of the
performance components as possible. The best-case scenario would find a
suitably date-coded, matching-number, 327ci-275HP engine of the proper block
casting number that is stamped with the manual transmission engine model code
(MK or ML in 1967; EA in 1968). This L30 engine should be teamed to a suitably
date-coded and matching number 4-speed Saginaw transmission assembled of
castings with the proper numbers. If either engine or transmission have been replaced,
L30/M20 verification will require checking the date-code on the 12-bolt rear
end; to supplement this one should attempt to locate as many of the other
performance components as possible, especially the traction bar (1967) or
multi-leaf rear springs and rear brake proportioning valve (1968).
Shown below is the two-piece rear brake line with rear brake
proportioning valve to improve pressure distribution between front and rear
brakes. (1968 only. 1967 Camaros featured this only on air conditioned cars and
disc brake cars.
If most of these components are missing (many are often
missing due to modifications made over the years), including more than one of
the three key drivetrain items (engine, transmission, rear-end), the claim of a
real L30/M20 may be difficult to reliably establish.
If you have one of these difficult cases, contact the author
for help with additional identifying features.
How Many...?
How many L30/M20s were built? While Chevrolet records
document how many of each individual option was sold, we don't at
this time have any record of how many option combinations like the
L30/M20 were sold. However, we can make an educated guess, based on
transmission usage, from the data shown in the table below13. The L30 predominately drove either the
standard Saginaw 3-speed manual, the M35 PowerGlide two-speed automatic, or the
"close ratio" M20 Saginaw 4-speed manual. The total number of these
three transmissions sold in Camaros in model years 1967-68 was approximately
430,458. Dividing this into the number of M20s sold (Saginaw + Muncie), 80,967,
gives us a rough estimate (perhaps a significant over-estimate, since we are
including the Muncies in the M20 arithmetic) of the number of L30s mounted to
M20 transmissions; just under 19% (18.81%). Multiplying this factor by the
number of L30s sold indicates that a maximum of 8835 L30/M20 Camaros were
produced for both years; less than 2% of all Camaros built in these years.
Interestingly enough, production quantities this low put the rarity of the
L30/M20 on a par with models like the 1967-69 SS with the L78 396ci-375HP
engine (9464 built) or the 1968-69 SS with the L34 396ci-350HP engine (4597
built), and significantly more rare than most other production models, even the
SS-350 or Z28. If this estimate is reasonably close, only the L89 aluminum-head
396-powered SS (583), or the various low-volume COPO models would be
significantly rarer. Given the relative lack of respect that this poorly
appreciated option combination has enjoyed, these thirty years later it is
likely that surviving original L30/M20s are counted in the hundreds rather than
the thousands14.
CAMARO PRODUCTION QUANTITIES:
1967 1968 Both Years (+1969) % Total Total Vehicles: 220,906 235,147 456,053 100 Engines Subtotals: L48 (350ci-295HP) 29,270 12,496 41,766+22,339 9.16 L30 (327ci-275HP) 25,287 21,686 46,973 10.30 L35 (396ci-325HP) 4,003 10,773 14,776+6752 3.24 L34 (396ci-350HP) --- 2,579 2579+2018 0.57 L78 (396ci-375HP) 1,138 4,575 5713+4889 1.25 Transmissions: M20 (4-speed manual) 45,806 35,161 80,967 17.75 Std 3-speed manual 48,506 51,093 99,599 21.84 MB1 (2-speed semi-automatic) --- 3,099 3,099 0.68 M13 (special 3-speed manual) 681 752 1,433 0.31 M21 (4-speed manual) 1,733 11,134 12,867 2.82 M22 (4-speed manual) --- 1,277 1,277 0.28 M35 (PowerGlide automatic) 122,727 127,165 249,892 54.79 M40 (TurboHydraMatic automatic) 1,453 5,466 6,919 1.52 L30/M20 Estimate: 4,756? 4,079? 8,835? 1.94?
source: http://www.camaro-untoldsecrets.com/articles/spotlite2.htm
by Rich Fields.
YOU ARE NOT JUST BUYING PARTS – YOU ARE GETTING OUR CAMARO EXPERTISE
Tags: camaro part, camaro parts, Camaro restoration parts, 69 camaro, 1969 camaro, aftermarket camero parts, chevrolet camaro, ss, z28, rs, chevrolet, restoration, 68 camaro, chevy, 67, 69, f-body, camaro, chevy camaro, chevrolet camaro, gm, z-28, 350, ls1, z/28, pace car, camaro ss, 69 camaro, first generation, copo, fbody, yenko, 67 camaro, 68 camaro, musclecar
http://www.stevescamaroparts.com
No comments:
Post a Comment