Monday, July 29, 2013

1967 - 1969 Camaro Parts - First Generation Camaro Underhood Details - Steves Camaro Parts San Bruno - 650-873-1890






 

 
Underhood Details
Have you seen some really good looking cars, with shiny new paint and interiors, at shows and cruise ins. But why is the hood closed? pop the hood, you instantly see why. The engine and underhood compartment look every bit of 20-30 years old. Dirt and grease, rust, faded and flaking paint. Sound familiar? Want to do something about it? You'll have to invest in some time and work, but the results will be worth it. You'll no longer have to keep the hood closed, as a matter of fact, you'll proudly have that hood up, for all to see. Lets get started.
The first order of business is to get the engine and engine compartment as clean and as free of dirt and grease as possible. A good product to use for this is some purple stuff called SuperClean, by Castrol. This product, plus a high pressure washer will really help get it clean. Now you're ready to pull the engine to get the best results. It really is easier to do this job right if you pull the engine, but satisfactory results can be had if you take off all the accessories and leave it in
Here are the basic colors in the compartment

* frame and upper/lower control arms and upper shafts-semigloss black
* front coil springs-gloss black or natural(better detail contrast)
* firewall, inner fenders, radiator support-semigloss black
* radiator and fan-gloss black
* fan clutch-natural aluminum
* radiator shroud-natural black plastic or gloss black
* steering box-natural cast iron gray
* steering linkage-natural steel
* front sway bar-natural cast iron gray
* heater or AC housing-semigloss black
* hood hinges, latch, catch and springs- gray phosphate plated
* brackets and steel pulleys-semi gloss or gloss black(gloss gives more detail contrast)
* cast iron pulleys- natural cast iron
* master cylinder- natural cast iron(some use gloss black)
* brake booster-gold cadmium plated(master cylinder lid also)
* windshield wiper motor-gloss black
* alternator- natural aluminum
* power steering pump-gloss black
* AC compressor-semigloss black
* steering column shaft-natural steel
* horns- gloss black
* coil- gloss black
* voltage regulator-gloss black
* distributor- natural aluminum with gloss black cap
* fuel and brake lines-natural steel
UNDERCARRIAGE DETAILS
* transmission-natural aluminum
* bellhousing-natural aluminum
* transmission support- semigloss black
* driveshaft- natural steel
* rear axle-semigloss black
* rear swaybar-semigloss black
* rear coil springs-gloss black
* rear control arms-semigloss black
* gas tank-natural steel(shiny)
* gas tank straps-gloss black
* parking brake cables-natural steel
THATS IT!!!
you should be looking pretty good.

Friday, July 26, 2013

1967 - 1969 Camaro Parts - 68 Camaro, Rally Sport Front Conversion kit - Steves Camaro Parts San Bruno - 650-873-1890


You've got a standard Camaro front end and you want to add a Rally Sport hidden headlight package. What do you do? In the past, some of the components may not have been available for this conversion. But now, Steve's Camaro Parts offers exactly what you need to convert your standard front end to a Rally Sport front end! Yes, all the components you need are here! We now offer kits for 1967 through 1969

 
 
 



68 Camaro, Rally Sport Front Conversion kit, this kit consists of the finest parts available in the marketplace today.

You will receive, 2 complete assembled headlamp bucket assemblies, all needed hardware, 2 grille moldings(upper and lower), 1 grille(center), 2 RS fenders bezels, 1 complete Rally sport color coded hose kit, all tie straps, filters, 4 actuator support brackets(2 large and 2 small), 1 pair actuator shields, 2 complete parking lamps assemblies, 1 vacuum tank, 1 vacuum tank switch, 2 RS headlamp actuators, 1 RS headlamp switch, 2 fender adapter brackets, 1 set of RS door stop brackets and rubber bumpers, 1 RS lower front valance, 1 RS hood latch, 1 front light wire harness for relocation of park lamps(correct boots and seals)

with this kit you convert you're STD fenders to RS with the adapter the best way if you have those hard to find good fitting GM fenders

http://www.stevescamaroparts.com




Thursday, July 25, 2013

1967 - 1969 Camaro Parts - Camaro Sports Seats - Steves Camaro Parts San Bruno - 650-873-1890

Renew - Restore - Replace Your Camaro Sports Seats
 
 
 
Keep Your Factory Seat!
Utilizes the factory seat frames
 
Sport Seat Bolstering!
Transforms flat factory seats into G-force absorbing sport seats
 
OE Patterns & Materials!Retains original factory look
 
This operation is committed to craftsmanship, safety, innovative design and integrated automotive products to meet our customer’s needs.
 
Steves Camaro Parts customers love these seats!
 
 
 
 


http://www.stevescamaroparts.com